Buyer's Guide


Lyons





Company Headquarters

185 Research Parkway
Meriden, CT 06450
United States

Company Description

Lyons provides manufacturing solutions to the Medical Device Industry. As an ISO 9001:2008 and ISO 13485:2003 certified company, we are committed to providing quality products and services. From product development to production, look to Lyons for your medical device solutions.

Buyer's Guide

    Related Content

    • Biologics
      The ABCs of HCT/Ps

      The ABCs of HCT/Ps

      Navigating the complex regulatory pathway of human cell and tissue products.
      Lindsay Kleinwaks, Ph.D., Associate, Regulatory Affairs, MCRA 05.23.19

    • 3-D Printing/Additive Mfg. | Coatings/Surface Modification | Contract Manufacturing | Extremities | Finishing | Large Joint | Laser Processing | Machining & Tooling | Materials | Spine/Neurology
      Technology Revision: Changes in Implant Manufacturing

      Technology Revision: Changes in Implant Manufacturing

      Aspects of implant manufacturing are changing, enabling improved fabrication techniques with new material options.
      Mark Crawford, Contributing Writer 05.23.19

    • U.S. Healthcare Spending in Orthopedics

      U.S. Healthcare Spending in Orthopedics

      While total 2017 U.S. healthcare spending grew by 3.9 percent to $3.5 trillion,1 it was at a lower rate than the 4.8 percent increase reported by the U.S. Department of Health and Human Services in 2016. The 2017 growth rate correlates to the lower i…
      Maria Shepherd, President and Founder, Medi-Vantage 05.23.19


    • Trauma/Sports
      FDA OKs AMDT Holdings

      FDA OKs AMDT Holdings' SixFix Hexapod Fixator Device

      External fixator shortens surgical time, simplifies inventory, and enhances patient care.
      PR Newswire 05.15.19

    • Materials
      FDA Addresses Nitinol in Draft Guidance

      FDA Addresses Nitinol in Draft Guidance

      The focus of the DG is on the technical assessments that should be included in any regulatory submission for a device made of Nitinol.
      William A. Hyman, Professor Emeritus of Biomedical Engineering, Texas A&M University, & Adjunct Professor of Biomedical Engineering, The Cooper Union 04.30.19

    • 3-D Printing/Additive Mfg. | Design | Prototyping
      Additive Manufacturing: A Tool for Driving Innovation

      Additive Manufacturing: A Tool for Driving Innovation

      Production applications for additive manufacturing are growing, but there are considerations to keep in mind.
      Tom Fripp, Founder and Managing Director, Addition Design & Research 03.29.19


    • FDA Commissioner Scott Gottlieb to Step Down

      FDA Commissioner Scott Gottlieb to Step Down

      The 46-year-old physician, former venture capitalist, and drug consultant is due to resign in a month.
      Sam Brusco, Associate Editor 03.05.19

    • Spine/Neurology
      FDA Issues Guidance on Brain-Computer Interfaces for Paralysis or Amputee Patients

      FDA Issues Guidance on Brain-Computer Interfaces for Paralysis or Amputee Patients

      These devices can allow significantly greater mobility and independence for patients.
      Scott Gottlieb, M.D., Commissioner, U.S. Food and Drug Administration 02.25.19

    • MIS/Robotics
      McGinley Orthopedics Recruits Industry Leader as New CEO

      McGinley Orthopedics Recruits Industry Leader as New CEO

      Carl O'Connell most recently served as CEO of Xtant Medical.
      PR Newswire 02.14.19


    • Extremities | Large Joint | Packaging & Sterilization | Spine/Neurology | Trauma/Sports
      Realizing the Promise of Pre-Validated Packaging

      Realizing the Promise of Pre-Validated Packaging

      Balancing product quality, patient safety, and faster time to market is possible—it takes careful consideration in packaging design and validation.
      Ben White, Engineering Manager, Business Development, Millstone Medical Outsourcing 02.13.19

    • Packaging & Sterilization
      Squeaky Clean: Orthopedic Device Packaging & Sterilization

      Squeaky Clean: Orthopedic Device Packaging & Sterilization

      A variety of industry experts discuss the trends, challenges, and future of orthopedic and medical device packaging and sterilization.
      Sam Brusco, Associate Editor 02.13.19

    • 3-D Printing/Additive Mfg.
      The Gawky Teenage Phase: 3D Printing Enters Adolescence

      The Gawky Teenage Phase: 3D Printing Enters Adolescence

      As the mom of a young teen, I get a daily, real-time view of the of the challenges of a human doing his best to grow up. There are a lot of false starts, half-baked ideas, and epic fails, but there’s also tremendous potential and frequent victo…
      Dawn A. Lissy, President & Founder, Empirical 02.13.19


    • Your 2019 ‘Regulatory Issues to Watch’ List

      Your 2019 ‘Regulatory Issues to Watch’ List

      In 2018, one of the most prominent themes for the medical device industry had to be change. The year marked a continued transition for a number of regulatory initiatives as well as the emergence of several new challenges. In spite of how serious some…
      Sean Fenske, Editor-in-Chief 02.13.19

    • 3-D Printing/Additive Mfg. | Extremities
      FDA OKs Additive Orthopaedics

      FDA OKs Additive Orthopaedics' Patient-Specific 3D Printed Locking Lattice Plates

      Patient-specific implants will be the cornerstone of Game Plan, an integrated surgical planning system launching later this year.
      PR Newswire 01.15.19

    • Large Joint
      Miach Orthopaedics Appoints New President and CEO

      Miach Orthopaedics Appoints New President and CEO

      Martha Shadan has served in a number of senior leadership positions at Zimmer, Covidien, Bristol Myers Squibb Co., and Merck Millipore.
      Business Wire 01.03.19