Perhaps even more remarkable than the technology is the cost: $7,000. That price tag compares to systems that print with just three materials at one time and can cost roughly $250,000.
In a paper accepted at the recent SIGGRAPH computer-graphics conference, an MIT Computer Science and Artificial Intelligence Laboratory (CSAIL) team presented a 3-D printer that can print an unprecedented 10 different materials at once by using 3-D-scanning techniques that save time, energy, and money.
Delivering resolution at 40 microns—or less than half the width of a human hair—the “MultiFab” system is the first 3-D printer to use 3-D-scanning techniques from machine vision, which offers two key advantages in accuracy and convenience over traditional 3-D printing, according to MIT.
First, MultiFab can self-calibrate and self-correct, freeing users from having to do the fine-tuning themselves. For each layer of the design, the system’s feedback loop 3-D scans and detects errors and then generates so-called “correction masks.” This approach allows the use of inexpensive hardware while ensuring print accuracy.
Secondly, MultiFab gives users the ability to embed complex components, such as circuits and sensors, directly onto the body of an object, meaning that it can produce a finished product, moving parts and all, in one fell swoop.
"The platform opens up new possibilities for manufacturing, giving researchers and hobbyists alike the power to create objects that have previously been difficult or even impossible to print," said Javier Ramos, a research engineer at CSAIL who co-authored the paper with members of professor Wojciech Matusik’s Computational Fabrication Group.
The researchers have used MultiFab to print everything from smartphone cases to light-emitting diode lenses—and they envision an array of applications in consumer electronics, microsensing, medical imaging, and telecommunications, among other things. They plan to also experiment with embedding motors and actuators that would make it possible to 3-D print more advanced electronics, including robots.
MultiFab was built using low-cost, off-the-shelf components that cost around $7,000 total. Besides Ramos and Matusik, the team includes lead author and former CSAIL postdoc Pitchaya Sitthi-Amorn, former graduate students Joyce Kwan and Justin Lan, research scientist Wenshou Wang, and graduate student Yu Wang of Tsinghua University.
Why multi-material printing is hard
There are many technical challenges to creating a printer like MultiFab: Different materials require different pressures and temperatures, so printing something complex usually involves printing all individual pieces separately, and then assembling them by hand.
But with MultiFab, the components are simply put into the platform and the printer does the rest. Cameras automatically scan the components' three-dimensional geometries and uses that information to print other objects around them. For example, an iPhone can be put into the printer, and the system can be programmed to print a case that is directly affixed onto the phone.
Other multi-material printers work via “extrusion” technologies, using nozzles that squirt out melted material, that then hardens, to build an object layer-by-layer. Such techniques, while sufficient for certain uses, often lead to low-resolution finished items.
MultiFab, on the other hand, mixes microscopic droplets of photopolymers together that are then sent through inkjet printheads similar to those in office printers. The computationally intensive process, which involves crunching dozens of gigabytes of visual data, can be much more easily scaled to larger objects and multiple materials.
What’s next?
Ramos said he could imagine printers like MultiFab being used by researchers, manufacturers, and consumers.
Companies could edit and finalize designs faster, allowing them to bring products to market sooner. Big-box stores that have already installed single-material 3-D printers could graduate to multi-material ones, for use by casual hobbyists and small business owners alike.
“Picture someone who sells electric wine openers, but doesn’t have $7,000 to buy a printer like this. In the future, they could walk into a FedEx with a design and print out batches of their finished product at a reasonable price,” Ramos mused. “For me, a practical use like that would be the ultimate dream.”
The work was supported in part by a grant from MIT's Deshpande Center for Technological Innovation, the Defense Advanced Research Projects Agency, and the National Science Foundation.
Watch the video below to see how CSAIL researchers designed MultiFab to 3-D print up to 10 materials at once: