The main goal of a recent study published in the journal Bone was to find biomechanical criteria for the discrimination of the risk of hip fractures by exploring DXA-based 3D models and specific finite element simulations for patients in vivo. Carlos Ruiz Wills, first author of the study, and Jérôme Noailly, study coordinator, both members of the Biomechanics and Mechanobiology laboratory at the BCN MedTech Research Unit explain:
"This research has demonstrated that the modeling and biomechanical simulation of the bone by means of finite element-based 3D reconstructions of conventional bone densitometry provide descriptors of the internal tissue mechanics that go beyond the traditionally explored bone density when it comes to discriminating the risk of osteoporotic fracture of the proximal femur (hip fracture)."
The finite elements method is a numerical calculation method widely used in simulations of complex physical and biological systems that enables solving differential equations associated with physical problems on complicated geometries.
This study combines the competencies of the Biomechanics and Mechanobiology laboratory in computational biomechanics and the competencies of the SiMBIOSys group at BCN MedTech, directed by Miguel A. Gonzalez Ballester (ICREA), in biomedical image analysis. Such synergy illustrates new trends in exploiting the potential of models and simulations to improve patient diagnosis, explain Jérôme Noailly and Miguel A. González Ballester: "On the one hand, advanced image analysis provides a customized framework of modeling and augmented reality, by integrating the morphology and the densities of the patients' bones into virtual models. Moreover, the conversion of these models into finite element models capable of integrating equations of the bone's mechanical behavior in the event of external mechanical events, such as a fall, enables calculating descriptors that uniquely integrate crossed effects between bone quality, particular bone morphology and external mechanical forces that often depend on the weight and height of the patient".
"The 3D models obtained in this study come from the reconstruction of flat 2D image densitometry (DXA, dual-energy X-ray absorptiometry) using the 3D Shaper software developed by Galgo Medical, a UPF spin-off technology company", comments Luis Miguel del Rio, a radiologist at the CETIR radiology center (Ascires Group) and a contributor to the study. The potential of this biomedical technology comes from the fact that the simulations obtained by this research include three-dimensional interaction between bone density, the geometry of the femur and external mechanical loads, which cannot be measured in a patient.
The results obtained in this study show a power of discrimination usually greater than 80 percent compared to the calculation of hip fracture risk following a fall by the patient. In addition, in discriminating the risk of fracture, the simulations have allowed the authors to grant relative importance to the stress state of the trabecular bone, compared to the stress state of the cortical bone.